Koni Sport - rear set

The KONI Sport product line is one of our specialties. KONI serves sporting drivers with a carefully designed range of sport shock absorbers and suspension kits with lowering springs. This line focuses on exceptional road-holding and handling properties, combined with an acceptable level of comfort.

Its characteristics include responsive steering, improved body control and limited body movements when braking and accelerating, all resulting in a direct feel and excellent wheel-road contact.

Many of the KONI Sport dampers are externally adjustable by means of a knob, so they need not be disassembled from the car. The fine-tuning of the damping forces to personal driving style and to different driving conditions is therefore not more than a matter of seconds. The best of fine-tuning technology straight from the world of Formula 1 racing.

Independently adjustable in both compression and rebound this series racing shock absorbers offer over 140 different combinations and rebound, to finely tune the chassis for maximum performance.

General Precaution - Do not place the piston rod in a vice, nor cause damage to the rod surface.

Figure 3: Do not place the shock absorber in a vise (except at the lower eye) See figure 2.

Figure 1: Move pin left or right to increase rebound forces (counter-clockwise)

Rebound - Insert a pin into the slotted adjuster located at the top eye (figure 1). Moving the pin from left to right (counterclockwise) will cause the forces to increase. From the minimum or factory positions, there are 12 possible sweeps of adjustment ( 1 sweep equal